Advantages and Applications of Globe Valve – Complete Specifications by ValvesOnly
A globe valve is linear motion closing-down valves that are designed to stop, start and control the current of the fluid. In this the closure member is referred to as a disc, it can completely open or close. Gate Valve Manufacturer provides the globe valves with different functionality. Bellow Sealed Butterfly Valve Manufacturer has designed these valves for sustaining the high pressure and advanced level of durability. In the globe valve, when the disc is open, the flow is completely released and involves the regulation of the motion or it can completely obstruct or shut the motion of the same.
ValvesOnly provides the best globe valves that are mainly implemented for throttling and controlling the fluid flow and are generally used in small-size piping. You can also get Steam Traps valves from Steam Trap Manufacturer In USA – these are the automatic valves used for heating or as a driving force for mechanical power. Call ValvesOnly one of the best Valve Manufacturer in USA to know more about the glove valve and other types of valve functionality at best price.
Globe valves are used for isolation and throttling functions. The globe is used in the application or services where control of the fluid is not a significant factor. A Globe valve is used to limit fluid flow control. In this valve, shut-off is performed by moving the disc against the flow stream. The flow pattern of the gas or fluid through a globe valve involves high-pressure flow. Globe valve is an excellent valve to use in the high-pressure operation of steam. The valves provided by the manufacturers are factory-made with quality material for long-term use.
Advantages and Disadvantages of Globe valves
Advantages
-
- Good shut off and on the capability
- Good capability of throttling control
- High-pressure flow
- Available in different angle and patterns, each offering unique capabilities
- Easy to on and off the disc
- Provides the capability of the stop-check valve and that is not attached to the stem
Disadvantages
- Higher pressure drop and it can’t control
- Requires extra force or a larger eclectic actuator to open the valve with pressure under the seat
Applications of Globe valves:
- The cooling water systems where the fluid flow need to be controlled
- Fuel oil system or gas system when the flow of fluid or gas needs to be regulated and leak tightness is of importance
- High and low drains when leak tightness and safety are major considerations
- Feedwater, chemical feed, condenser air extraction, and extractions vents systems
- Boiler, main steam, and heater drain system
- Turbine seals and drains
- Turbine lube oil system and others
Globe valves have specific fluid flow directions. Depending on the different applications. A globe valve will have fluid above or below the disc. Globe valves can be managed if the disk closes or opens against the same direction of the fluid flow. ValvesOnly is one of the largest globe valve manufacturers in the USA.
Leave a reply